The Contribution of Various Plasticity Mechanisms to the Deformation Behavior of Gradient Nanograined FeNi Alloy

AV Korchuganov and KP Zolnikov and DS Kryzhevich, METALS, 12, 573 (2022).

DOI: 10.3390/met12040573

This paper investigates the deformation behavior of a gradient grained FeNi sample under uniaxial tension using molecular dynamics simulations. The simulated sample consists of five layers with grains of the same size in each layer ranging from 10 to 30 nm. It is shown that the sample plasticity develops through sequential activation of different mechanisms. These are either the generation of certain structural defects, or grain boundary migration, or grain boundary sliding. The onset of plasticity is provided by partial dislocations that produce stacking faults in large grains. Other mechanisms involved in plastic deformation are the nucleation of trailing/full dislocations and twinning, which gradually affect smaller and smaller grains. Grain boundary sliding is more intensive in smallest grains due to their less constraint. Grain boundary migration generally leads to the growth of large grains. At strains below 7.0%, plasticity is mainly contributed by the evolution of stacking faults. At higher strains, the main plasticity mechanisms are twinning and grain boundary migration. As the strain increases, the maximum values of accumulated shear, the density of intragranular defects, and the number of atoms involved in intergranular rearrangements are observed first in large, then in medium, and finally in small grains.

Return to Publications page