\(\renewcommand{\AA}{\text{Å}}\)
fix deform/pressure command
Syntax
fix ID group-ID deform/pressure N parameter style args ... keyword value ...
ID, group-ID are documented in fix command
deform/pressure = style name of this fix command
N = perform box deformation every this many timesteps
one or more parameter/arg sequences may be appended
parameter = x or y or z or xy or xz or yz or box x, y, z args = style value(s) style = final or delta or scale or vel or erate or trate or volume or wiggle or variable or pressure or pressure/mean pressure values = target gain target = target pressure (pressure units) gain = proportional gain constant (1/(time * pressure) or 1/time units) pressure/mean values = target gain target = target pressure (pressure units) gain = proportional gain constant (1/(time * pressure) or 1/time units) NOTE: All other styles are documented by the fix deform command xy, xz, yz args = style value style = final or delta or vel or erate or trate or wiggle or variable or pressure pressure values = target gain target = target pressure (pressure units) gain = proportional gain constant (1/(time * pressure) or 1/time units) NOTE: All other styles are documented by the fix deform command box = style value style = volume or pressure volume value = none = isotropically adjust system to preserve volume of system pressure values = target gain target = target mean pressure (pressure units) gain = proportional gain constant (1/(time * pressure) or 1/time units)zero or more keyword/value pairs may be appended
keyword = remap or flip or units or couple or vol/balance/p or max/rate or normalize/pressure
couple value = none or xyz or xy or yz or xz couple pressure values of various dimensions vol/balance/p value = yes or no Modifies the behavior of the volume option to try and balance pressures max/rate value = rate rate = maximum strain rate for pressure control normalize/pressure value = yes or no Modifies pressure controls such that the deviation in pressure is normalized by the target pressure NOTE: All other keywords are documented by the fix deform command
Examples
fix 1 all deform/pressure 1 x pressure 2.0 0.1 normalize/pressure yes max/rate 0.001
fix 1 all deform/pressure 1 x trate 0.1 y volume z volume vol/balance/p yes
fix 1 all deform/pressure 1 x trate 0.1 y pressure/mean 0.0 1.0 z pressure/mean 0.0 1.0
Description
New in version 17Apr2024.
This fix is an extension of the fix deform command, which allows all of its options to be used as well as new pressure-based controls implemented by this command.
All arguments described on the fix deform doc page also apply to this fix unless otherwise noted below. The rest of this doc page explains the arguments specific to this fix. Note that a simulation can define only a single deformation command: fix deform or fix deform/pressure.
For the x, y, and z parameters, this is the meaning of the styles and values provided by this fix.
The pressure style adjusts a dimension’s box length to control the corresponding component of the pressure tensor. This option attempts to maintain a specified target pressure using a linear controller where the box length \(L\) evolves according to the equation
where \(k\) is a proportional gain constant, \(P_t\) is the target pressure, and \(P\) is the current pressure along that dimension. This approach is similar to the method used to control the pressure by fix press/berendsen. The target pressure accepts either a constant numeric value or a LAMMPS variable. Notably, this variable can be a function of time or other components of the pressure tensor. By default, \(k\) has units of 1/(time * pressure) although this will change if the normalize/pressure option is set as discussed below. There is no proven method to choosing an appropriate value of \(k\) as it will depend on the specific details of a simulation. Testing different values is recommended.
By default, there is no limit on the resulting strain rate in any dimension. A maximum limit can be applied using the max/rate option. Akin to fix nh, pressures in different dimensions can be coupled using the couple option. This means the instantaneous pressure along coupled dimensions are averaged and the box strains identically along the coupled dimensions.
The pressure/mean style changes a dimension’s box length to maintain a constant mean pressure defined as the trace of the pressure tensor. This option has identical arguments to the pressure style and a similar functional equation, except the current and target pressures refer to the mean trace of the pressure tensor. All options for the pressure style also apply to the pressure/mean style except for the couple option.
Note that while this style can be identical to coupled pressure styles, it is generally not the same. For instance in 2D, a coupled pressure style in the x and y dimensions would be equivalent to using the pressure/mean style with identical settings in each dimension. However, it would not be the same if settings (e.g. gain constants) were used in the x and y dimensions or if the pressure/mean command was only applied along one dimension.
For the xy, xz, and yz parameters, this is the meaning of the styles and values provided by this fix. Note that changing the tilt factors of a triclinic box does not change its volume.
The pressure style adjusts a tilt factor to control the corresponding off-diagonal component of the pressure tensor. This option attempts to maintain a specified target value using a linear controller where the tilt factor T evolves according to the equation
frac{d T(t)}{dt} = L(t) k (P - P_t)
where \(k\) is a proportional gain constant, \(P_t\) is the target pressure, \(P\) is the current pressure, and \(L\) is the perpendicular box length. The target pressure accepts either a constant numeric value or a LAMMPS variable. Notably, this variable can be a function of time or other components of the pressure tensor. By default, \(k\) has units of 1/(time * pressure) although this will change if the normalize/pessure option is set as discussed below. There is no proven method to choosing an appropriate value of \(k\) as it will depend on the specific details of a simulation and testing different values is recommended. One can also apply a maximum limit to the magnitude of the applied strain using the max/rate option.
The box parameter provides an additional control over the x, y, and z box lengths by isotropically dilating or contracting the box to either maintain a fixed mean pressure or volume. This isotropic scaling is applied after the box is deformed by the above x, y, z, xy, xz, and yz styles, acting as a second deformation step. This parameter will change the overall strain rate in the x, y, or z dimensions. This parameter can only be used in combination with the x, y, or z commands: vel, erate, trate, pressure, or wiggle. This is the meaning of its styles and values.
The volume style isotropically scales box lengths to maintain a constant box volume in response to deformation from other parameters. This style may be useful in scenarios where one wants to apply a constant deviatoric pressure using pressure styles in the x, y, and z dimensions ( deforming the shape of the box), while maintaining a constant volume.
The pressure style isotropically scales box lengths in an attempt to maintain a target mean pressure (the trace of the pressure tensor) of the system. This is accomplished by isotropically scaling all box lengths \(L\) by an additional factor of \(k (P_t - P_m)\) where \(k\) is the proportional gain constant, \(P_t\) is the target pressure, and \(P_m\) is the current mean pressure. This style may be useful in scenarios where one wants to apply a constant deviatoric strain rate using various strain-based styles (e.g. trate) along the x, y, and z dimensions (deforming the shape of the box), while maintaining a mean pressure.
The optional keywords provided by this fix are described below.
The normalize/pressure keyword changes how box dimensions evolve when using the pressure or pressure/mean deformation styles. If the deform/normalize value is set to yes, then the deviation from the target pressure is normalized by the absolute value of the target pressure such that the proportional gain constant scales a percentage error and has units of 1/time. If the target pressure is ever zero, this will produce an error unless the max/rate keyword is defined, described below, which will cap the divergence.
The max/rate keyword sets an upper threshold, rate, that limits the maximum magnitude of the instantaneous strain rate applied in any dimension. This keyword only applies to the pressure and pressure/mean options. If a pressure-controlled rate is used for both box and either x, y, or z, then this threshold will apply separately to each individual controller such that the cumulative strain rate on a box dimension may be up to twice the value of rate.
The couple keyword allows two or three of the diagonal components of the pressure tensor to be “coupled” together for the pressure option. The value specified with the keyword determines which are coupled. For example, xz means the Pxx and Pzz components of the stress tensor are coupled. Xyz means all 3 diagonal components are coupled. Coupling means two things: the instantaneous stress will be computed as an average of the corresponding diagonal components, and the coupled box dimensions will be changed together in lockstep, meaning coupled dimensions will be dilated or contracted by the same percentage every timestep. If a pressure style is defined for more than one coupled dimension, the target pressures and gain constants must be identical. Alternatively, if a pressure style is only defined for one of the coupled dimensions, its settings are copied to other dimensions with undefined styles. Couple xyz can be used for a 2d simulation; the z dimension is simply ignored.
The vol/balance/p keyword modifies the behavior of the volume style when applied to two of the x, y, and z dimensions. Instead of straining the two dimensions in lockstep, the two dimensions are allowed to separately dilate or contract in a manner to maintain a constant volume while simultaneously trying to keep the pressure along each dimension equal using a method described in (Huang2014).
If any pressure controls are used, this fix computes a temperature and pressure each timestep. To do this, the fix creates its own computes of style “temp” and “pressure”, as if these commands had been issued:
compute fix-ID_temp group-ID temp
compute fix-ID_press group-ID pressure fix-ID_temp
See the compute temp and compute pressure commands for details. Note that the IDs of the new computes are the fix-ID + underscore + “temp” or fix_ID + underscore + “press”, and the group for the new computes is the same as the fix group.
Note that these are NOT the computes used by thermodynamic output (see the thermo_style command) with ID = thermo_temp and thermo_press. This means you can change the attributes of this fix’s temperature or pressure via the compute_modify command or print this temperature or pressure during thermodynamic output via the thermo_style custom command using the appropriate compute-ID. It also means that changing attributes of thermo_temp or thermo_press will have no effect on this fix.
Restart, fix_modify, output, run start/stop, minimize info
This fix will restore the initial box settings from binary restart files, which allows the fix to be properly continue deformation, when using the start/stop options of the run command. No global or per-atom quantities are stored by this fix for access by various output commands.
If any pressure controls are used, the fix_modify temp and press options are supported by this fix, unlike in fix deform. You can use them to assign a compute you have defined to this fix which will be used in its temperature and pressure calculations. If you do this, note that the kinetic energy derived from the compute temperature should be consistent with the virial term computed using all atoms for the pressure. LAMMPS will warn you if you choose to compute temperature on a subset of atoms.
This fix can perform deformation over multiple runs, using the start and stop keywords of the run command. See the run command for details of how to do this.
This fix is not invoked during energy minimization.
Restrictions
You cannot apply x, y, or z deformations to a dimension that is shrink-wrapped via the boundary command.
You cannot apply xy, yz, or xz deformations to a second dimension (y in xy) that is shrink-wrapped via the boundary command.
Default
The option defaults are normalize/pressure = no.
(Huang2014) X. Huang, “Exploring critical-state behavior using DEM”, Doctoral dissertation, Imperial College. (2014). https://doi.org/10.25560/25316